Description
Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1/8". Will not sag on overhead or vertical surfaces. Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils, and many other chemicals. Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes. 30-minute working time.
  • Category: Adhesives, Sealants & Tapes|Adhesive Products|Adhesives & Glues
  • Hazmat: Y
  • TestingAndApprovals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
  • MfgPartNumber: 11490
  • MinimumOrder: 1 EA
  • StandardPack: 1 EA
  • Adhesive Tensile Shear: 1,474 psi
  • Applicable Materials: Ceramic; Concrete; Most Metals
  • Capacity Vol. [Nom]: 30 lb
  • Capacity Wt. [Nom]: 30 lb
  • Chemical Compound: Epoxy
  • Color: Grey
  • Compressive Strength: 11,000 psi
  • Dielectric Strength: 340 V/mil
  • Full Cure Time @ Temp.: 8 h @ 75 °F
  • Gap Fill [Nom]: 3/4 in
  • Hardness [Nom]: 87 Shore D
  • Packing Type: Kit
  • Resistance: Hydrochloric Acid-10%; Sulfuric Acid-10%
  • Temp. Range [Max]: 300 °F
  • Tensile Strength [Nom]: 4,210 psi
  • Working Time [Min]: 30 min
  • Working Time [Nom]: 30 min
  • Wt.: 30 lb


Product SKU: 230-11490

Description
Alumina ceramic bead-filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1/8". Will not sag on overhead or vertical surfaces. Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils, and many other chemicals. Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes. 30-minute working time.
  • Category: Adhesives, Sealants & Tapes|Adhesive Products|Adhesives & Glues
  • Hazmat: Y
  • TestingAndApprovals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
  • MfgPartNumber: 11490
  • MinimumOrder: 1 EA
  • StandardPack: 1 EA
  • Adhesive Tensile Shear: 1,474 psi
  • Applicable Materials: Ceramic; Concrete; Most Metals
  • Capacity Vol. [Nom]: 30 lb
  • Capacity Wt. [Nom]: 30 lb
  • Chemical Compound: Epoxy
  • Color: Grey
  • Compressive Strength: 11,000 psi
  • Dielectric Strength: 340 V/mil
  • Full Cure Time @ Temp.: 8 h @ 75 °F
  • Gap Fill [Nom]: 3/4 in
  • Hardness [Nom]: 87 Shore D
  • Packing Type: Kit
  • Resistance: Hydrochloric Acid-10%; Sulfuric Acid-10%
  • Temp. Range [Max]: 300 °F
  • Tensile Strength [Nom]: 4,210 psi
  • Working Time [Min]: 30 min
  • Working Time [Nom]: 30 min
  • Wt.: 30 lb


Product SKU: 230-11490

Devcon by Devcon

230-11490

Devcon Wear Guard™ High Load

$601.31
$601.31
$476.93
ABOUT NABCO

Supplying You With High Quality Fasteners, Hardware, Safety Products, Tools & More

NABCO, North American Bolt Company, was founded in 1992 to supply our customers with high-quality products and tools at a rate that would save time and money. We provide incomparable support for all our customers, regardless of their needs. NABCO is a global distributor of fasteners and industrial shop supplies that provides superior service while striving to effectively offer the best solutions at the lowest possible cost.

At NABCO, we pride ourselves on supplying an extensive range of fasteners, safety products, collars and couplings, shop tools, and everything you need for your industrial projects. Our services include a machining shop, vendor-managed inventory, contract packaging, and private labeling.
Located in Oakwood, GA, we proudly serve the Atlanta-Sandy Springs-Alpharetta and Athens metro areas and the greater state of Georgia. Additionally, we offer nationwide shipping to meet all your needs. With 45 shipping locations across the US, we ensure swift delivery on every order, no matter your location.

Learn More

You May Also Need